Skip to main content
Critical Care

Anion Gap and Albumin Correction: A Worked ICU Example

An anion gap is more useful when you can explain what went into it, not just finish the subtraction. Calculate it with AG = sodium − (chloride + bicarbonate), then check albumin before deciding what the result means. Low albumin lowers the gap you’d expect to see. So a result inside the lab’s usual range can still hide an added acid burden.

S

Sachi, CRNA

CRNA

Last updated ·4 min read
CRNA Club study guide: Anion Gap and Albumin Correction: A Worked ICU Example
In This Article (7 sections)

Use the acid-base lessons and questions in the CCRN Toolkit to work through the calculation. It’s a separate paid offer. The seven-day platform trial adds the broader learning library and interview tools.

What is the gap actually telling you?

Blood is electrically balanced. But the routine chemistry panel doesn’t list every charged substance.

In this formula, sodium is the measured positive side. Chloride and bicarbonate are the measured negatives we’re subtracting. The difference helps estimate what’s left among the unmeasured negative and positive charges. Those are unmeasured anions and cations.

Albumin supplies much of the normal unmeasured negative charge. If albumin falls, the expected gap falls with it. That’s why you need to look at it before calling the gap normal.

This formula leaves potassium out. Some labs include it and use a different reference interval. Check which formula your lab uses. The Merck Manual’s acid-base review explains how the gap and albumin fit the larger assessment.

How do you calculate the measured gap?

Use values from the same measurement period. For this teaching example, the chemistry panel shows:

  • Sodium 138 mEq/L.
  • Chloride 106 mEq/L.
  • Bicarbonate 20 mEq/L.

Add the measured negatives first: 106 + 20 = 126.

Then subtract from sodium: 138 − 126 = 12 mEq/L.

Say the lab’s upper reference limit is 12. You could stop and say the result is at the upper boundary. But what if the patient’s albumin is low? Their expected gap may be lower than the usual reference assumes.

That’s the next step to practice with the acid-base material in the CCRN Toolkit. Do the subtraction, then ask what might change how you read it.

What happens if albumin is 2 g/dL?

The relationship described by Figge and colleagues supports a common estimate: add 2.5 mEq/L for each 1 g/dL that albumin is below 4 g/dL.

Corrected AG = measured AG + 2.5 × (4 − albumin in g/dL).

For albumin of 2 g/dL, that’s 2.5 × (4 − 2) = 5. Add 5 to the measured gap:

12 + 5 = 17 mEq/L.

So the raw gap was 12, but the albumin-corrected estimate is 17. Low albumin was hiding part of the difference you were looking for.

The correction is an estimate. References use different normal-albumin assumptions, including 4 and 4.5 g/dL. State which formula you’re using and keep it consistent.

Does 17 mean lactic acidosis?

Well, no. The gap doesn’t tell you which substance caused the change. Lactate, ketoacids, kidney dysfunction and certain ingestions are possibilities that need different questions and tests.

Look at bicarbonate and pH too. A raised gap doesn’t automatically mean the patient is acidemic at that moment. Another metabolic or respiratory process can offset the pH change.

The clinical reference on metabolic acidosis discusses the evaluation. Use the pattern to investigate the cause rather than assigning one from the gap alone.

Which mistakes are worth checking?

Look at the albumin units before entering the number. This formula uses g/dL. If the report says 20 g/L, divide by 10 to get 2 g/dL. Putting 20 into this formula would give you a meaningless result.

Then check the rest:

  1. Are you using the formula and reference range that go together?
  2. Were the chemistry values taken around the same time?
  3. Have you kept both the measured and corrected gap?
  4. Does the result fit the pH, compensation and history?

Those checks help you explain the result instead of handing over a corrected number with no assumptions attached.

Our Final Thoughts

Take the subtraction and albumin correction one step at a time. Keep the raw result beside the estimate, and say what you still need to investigate. You can understand the calculation without asking it to name the cause for you.

Try the correction without your notes

Work a second example with the acid-base material and questions in the CCRN Toolkit. If you’d like the wider learning library and interview tools too, explore the seven-day platform trial.

Tags:CRNA schoolanion gap albumin correction

Frequently Asked Questions

What is the anion-gap formula?

A common formula is sodium minus the sum of chloride and bicarbonate: AG = sodium − (chloride + bicarbonate). Check whether your lab includes potassium, and use the matching reference interval.

Why does low albumin lower the gap?

Albumin carries much of the normal unmeasured negative charge. Less albumin means a lower expected gap. Additional unmeasured anions may then be present even when the raw gap looks normal.

What units does albumin correction use?

The example uses g/dL. Divide g/L by 10 first: 20 g/L equals 2 g/dL. Check that before putting the number into the formula.

Do all references use the same normal albumin?

No. You will see assumptions such as 4 or 4.5 g/dL. Choose the stated formula and use it consistently rather than mixing the references.

Does a high gap always mean DKA?

No. Check the history and use appropriate tests for ketones, lactate, kidney function or suspected ingestions. The gap tells you to investigate; it does not identify the cause.