Skip to main content
Critical Care

Parkland Formula vs. Modified Brooke: Burn Resuscitation Calculations

The Parkland formula estimates the first 24 hours of burn resuscitation fluid using 4 mL × body weight in kg × percent total body surface area burned. Modified Brooke starts with 2 mL × kg × %TBSA. For adults with burns involving at least 20% TBSA, current American Burn Association guidance recommends starting at 2 mL/kg/%TBSA to reduce resuscitation volumes.

S

Sachi, CRNA

CRNA

Last updated ·4 min read
CRNA Club study guide: Parkland Formula vs. Modified Brooke: Burn Resuscitation Calculations
In This Article (7 sections)

If the fluid numbers take a little practice, start by following where the fluid went and when the injury happened. Those two ideas help you make sense of the arithmetic.

Both calculations give you a starting estimate. You still have to follow the patient’s response. To work through why the patient needs fluid, start with the burns lesson in the CRNA Club learning library through the seven-day platform trial, then practice the calculation below.

Why does a swollen burn patient need more fluid?

A major burn causes inflammation and makes capillaries leakier. Fluid moves out of the blood vessels and into the surrounding tissue. That’s where the swelling comes from.

But the circulation has lost some of that fluid. There’s less effective circulating volume to support blood flow to the organs, even while the patient looks edematous.

Giving fluid helps support the circulation. The difficulty is that the injured capillaries may still be leaking, so not all of the fluid you give stays inside the vessels. Too little fluid leaves perfusion inadequate. Too much can worsen edema and cause harm.

That is why you need an initial calculation and repeated assessment.

Which burns go into the percentage?

Count partial-thickness and full-thickness burns. Superficial erythema alone doesn’t count toward the resuscitation TBSA.

TBSA means total body surface area. The percentage tells you how much of that surface has the burn depth you’re counting. If the percentage is wrong, the fluid estimate will be wrong too.

Before multiplying, check four things:

  1. The patient’s weight in kilograms, using your protocol’s weight convention.
  2. The burn depth and percentage.
  3. When the injury happened.
  4. How much fluid the patient has already received and how they’re perfusing now.

For a 30% burn, enter 30, not 0.30. The formula uses the number of percentage points. Entering 0.30 would make your answer 100 times too small.

Use the burns and resuscitation lesson to check those inputs before you practice with a calculator. The time and previous fluid will change how you use the answer.

How different are Parkland and modified Brooke?

All right, take this fictional example: a 70 kg adult has 30% partial-thickness and full-thickness burns.

Starting approach Calculation Estimated first 24-hour volume
Parkland 4 × 70 × 30 8,400 mL
Modified Brooke 2 × 70 × 30 4,200 mL

Nothing about the patient’s weight or burn percentage changed. We changed the starting factor from 4 to 2, so the estimated volume is half as much.

The conventional Parkland formula still means 4 mL/kg/%TBSA. The current ABA recommendation to start adult resuscitation at 2 mL/kg/%TBSA for burns of at least 20% TBSA is why you shouldn’t automatically use the familiar 4 mL figure for every patient.

In the traditional schedule, half of the estimated volume is given during the first eight hours after the burn. The other half is spread over the next sixteen hours. Those first eight hours include time spent before arriving at the hospital.

What if the patient arrives two hours after the burn?

Keep using the 4,200 mL example. Half is 2,100 mL for the first eight hours.

Two hours have already passed, so six hours remain. The patient has received 600 mL during those first two hours. Subtract it from the first-eight-hour amount:

2,100 − 600 = 1,500 mL remaining.

Now divide by the time left:

1,500 mL ÷ 6 hours = 250 mL/hour.

For an actual patient, check how the burn protocol counts earlier fluids and work with the burn team to adjust this starting rate to the patient’s response.

Why not divide 2,100 mL by another eight hours? Because that would give the patient a fresh eight-hour window and ignore the 600 mL already given. The clock starts at injury, and previous fluid is part of the calculation.

How do you know whether the starting rate is working?

Follow urine output together with perfusion, blood pressure and the rest of the examination. Also look for harm from accumulating fluid, including worsening edema and concern for compartment syndromes.

If urine output falls, ask why before automatically increasing the fluid. The patient may need more resuscitation, but low urine output has other causes too. One number doesn’t answer the whole perfusion question.

Children, electrical burns and substantial associated trauma need different considerations. The worked example here is for adult thermal-burn arithmetic.

Our Final Thoughts

Give yourself time to practice the clock as well as the multiplication. In the example, explain why the injury time and earlier fluid change the remaining rate, then check your work. Keep the other part of the explanation with it: the formula starts the plan, and the patient’s response guides adjustment.

Practice another arrival time

Review the burns teaching in the seven-day CRNA Club platform trial, then change the example’s arrival time. Work out the hours left before reaching for the calculator.

Tags:CRNA schoolParkland formula

Frequently Asked Questions

Is the Parkland formula still 4 mL/kg/%TBSA?

Yes. That's the conventional Parkland calculation. Current ABA guidance recommends starting at 2 mL/kg/%TBSA for adults with burns of at least 20% TBSA. Check which approach you're using and which patients the recommendation covers.

Do you enter 30 or 0.30 for a 30% burn?

Enter 30 in the Parkland and modified Brooke formulas shown here. They use the numeric percent. Entering 0.30 would make the fluid estimate 100 times too small.

Does the eight-hour clock start at hospital arrival?

No. It starts when the burn happened. Work out how much of those eight hours has already passed, then account for fluid already given using the burn protocol.

Do superficial burns count toward resuscitation TBSA?

Superficial erythema alone doesn't count. Use the percentage of partial-thickness and full-thickness burns for these resuscitation estimates.

Should you increase fluid every time urine output falls?

Check why it fell. The patient may need more resuscitation, but low urine output can have other causes. Look at perfusion, blood pressure, the examination and possible fluid-related harm with the burn team.