Skip to main content
Critical Care

Auto-PEEP: How Do You Recognize Trapped Air on a Ventilator?

Auto-PEEP is pressure left in the lungs because the previous breath hasn’t finished emptying. You’ll also hear it called intrinsic PEEP. On the flow-time waveform, look for air still moving out when the next inspiration starts. The patient is getting another breath before the last one has fully left. Following that air out gives you a way to connect the waveform with the patient, rather than memorizing its shape.

S

Sachi, CRNA

CRNA

Last updated ·4 min read
CRNA Club study guide: Auto-PEEP: How Do You Recognize Trapped Air on a Ventilator?
In This Article (7 sections)

The respiratory lessons in the CCRN Toolkit help you connect that trace with what’s happening in the lungs. It’s a separate paid offer. The seven-day platform trial adds the wider learning library and interview tools.

Why doesn’t the air get out in time?

Air has to move through the airway to leave. More resistance slows it down. A larger volume also takes more time to get out. If another breath starts too soon, the lungs haven’t returned to the volume they’d reach after complete passive exhalation.

Repeat that over several breaths and the volume left at the end of expiration increases. That’s dynamic hyperinflation. Auto-PEEP is the pressure associated with that incomplete emptying.

The ATS teaching review on auto-PEEP connects this mechanism with recognition and measurement. Before thinking about a setting change, work out why this patient’s lungs aren’t emptying.

What does a faster rate do to expiratory time?

All right, let’s keep inspiratory time the same and change the rate.

At 20 breaths per minute, the full cycle lasts 60 ÷ 20 = 3 seconds. If inspiration uses 1 second, that leaves 2 seconds to exhale.

Now increase the rate to 30 breaths per minute. The full cycle is only 2 seconds. With that same 1-second inspiration, expiration gets 1 second.

So in this simplified example, the faster rate cuts emptying time in half. If the patient already struggles to exhale, that can worsen trapping. “Increase the rate to lower CO2” needs you to look at the mechanics too.

Use the CCRN Toolkit to practice this: predict what happens to the flow trace when expiration gets shorter, then check the explanation.

What should you follow on the waveform?

Find zero flow. Then follow expiration toward the next inspiration. Did the trace reach zero before the next breath? If air is still moving out, emptying is incomplete under those conditions.

Next, look for the reason. Is there airway obstruction or more resistance? How much time is available for expiration? Check the rate, inspiratory time and delivered tidal volume together.

Look at the patient too. Are they struggling to trigger a breath? Did the blood pressure change? A waveform makes more sense when you connect it with the change you can see at the bedside.

The trace won’t tell you exactly how much pressure is trapped or explain the cause by itself. Leaks, active effort and the ventilator’s display conventions can complicate what you’re seeing.

How do you measure the pressure?

Under appropriate passive conditions, an end-expiratory occlusion measures total PEEP. Subtract the external PEEP you’ve set to estimate the intrinsic part.

Say total PEEP is 12 cmH2O and set PEEP is 5 cmH2O. The difference is 12 − 5 = 7 cmH2O of intrinsic PEEP under those measurement conditions.

That calculation depends on a valid measurement. Active expiration prevents a simple passive interpretation, and uneven airway closure can hide trapping in some regions. Use the device-specific procedure with the respiratory team’s assessment. A high peak-pressure number isn’t a substitute.

Why can blood pressure fall?

More pressure inside the chest can make it harder for blood to return to the heart and affect right-heart loading. Severe dynamic hyperinflation can therefore contribute to hypotension. The trapped air isn’t only a gas-exchange problem.

It also adds work when the patient tries to trigger an assisted breath. They first have to overcome the trapped pressure before producing the signal that triggers the ventilator. So they can be working hard even before the machine delivers support.

The response depends on what’s causing the trapping and how the rest of the ventilation and oxygenation plan fits together. Rate, inspiratory delivery, tidal volume and obstruction all need consideration. There isn’t one external-PEEP adjustment that works for every patient.

Our Final Thoughts

Take a moment to follow expiration all the way to the next breath. If that step is still hard to picture, work through the timing example again. You can build from the air movement to the trapped pressure, then to the patient’s effort and circulation.

Give the waveform a reason

Work through the respiratory lessons and questions in the CCRN Toolkit, predicting whether expiration will finish before you check the explanation. For more clinical teaching and interview tools, try the seven-day platform trial.

Tags:CRNA schoolauto PEEP

Frequently Asked Questions

Is auto-PEEP the same as set PEEP?

No. Set PEEP is the external pressure chosen on the ventilator. Auto-PEEP comes from incomplete emptying. Both contribute to total PEEP.

What waveform suggests auto-PEEP?

Look for expiratory flow that has not reached zero when the next inspiration begins. It suggests incomplete emptying. Check effort, leaks and how that ventilator displays flow before interpreting it.

Why does a faster rate worsen trapping?

A faster rate gives each breath cycle less time. If inspiration takes the same amount of time, less is left for expiration. A patient who already empties slowly may trap more air.

Does a high peak pressure prove auto-PEEP?

No. Peak pressure is affected by resistance and respiratory-system mechanics too. Follow expiratory flow and use the appropriate measurement rather than deciding from peak pressure alone.

Is adding external PEEP always wrong?

No. In some patients it reduces the work needed to trigger a breath. Excessive pressure can worsen hyperinflation. The team needs to assess the patient’s mechanics and mode of support before choosing an adjustment.